Exhibitor and Sponsor New Product Information/Highlights

Adax, Inc.
Booth: 312

The AdaxPacketRunner is a state-of-the-art I/O, purpose-built, ATCA AMC carrier blade for NGN, IMS, and LTE telecom applications with IPtransport, Carrier Ethernet (CE), QoS, Security, Bandwidth Management, Packet Processing, I-TDM and Signaling requirements. This blade will meet the three greatest challenges for I/O in today’s ATCA systems: Scalability, Cost-Effectiveness & High Availability

Asis
Booth: 218

The Perform Series 6-slot push-pull ATCA chassis is specially designed for the most demanding applications, where superior performance, availability and reliability justify the investment on a best-in-every-category solution. It is a 6-slot, 6U, ATCA shelf featuring a 40Gbps, 3x replicated mesh backplane. Flexible design accommodates AC or DC power inputs that deliver up to 300W of redundant power per slot. Push pull cooling is designed to dissipate up to 300W per slot.

Astute Networks, Inc.
Booth 410

The Astute Networks Caspian Edge Storage Blade is the industry’s first 10Gb ATCA iSCSI storage blade and the first ATCA storage blade to support RAID 6 functionality. The Caspian family of ATCA storage blades meets the rigorous design criteria demanded by telecommunications and government systems vendors and is certified for NEBS Level 3 and Mil-Spec to ensure data reliability in the most extreme of operating environments.

BittWare
Booth: 308

S4-AMC
BittWare’s S4-AMC is a mid-size, single wide AdvancedMC that can be attached to AdvancedTCA carriers or other cards equipped with AMC bays, and used in MicroTCA systems. It features a high-density, low-power Altera Stratix IV GX FPGA designed specifically for serial I/O-based applications, and provides a configurable 15 port AMC SerDes interface supporting a variety of protocols, and a front panel 4x SerDes interface supporting CPRI and OBSAI, creating a completely flexible, reconfigurable AMC. Providing enhanced flexibility is the VITA 57-compliant FMC site which has an additional eight SerDes, 60 LVDS pairs, and six clocks.

SP/S4AM
BittWare’s SP/S4-AMC is a mid-size, single wide AdvancedMC that provides a four-cage SFP/SFP+ connector on the front panel with each transceiver providing support for virtually any serial communication standard, including:  Fibre Channel, Gigabit Ethernet, SONET, CPRI, and OBSAI.  The four SFP/SFP+ SerDes channels are connected directly to the on-board Altera Stratix IV GX FPGA which was specifically designed for serial I/O-based applications requiring high-density, reconfigurable logic.  The board provides unparalleled flexibility via the on-board FPGA and BittWare's ATLANTiS FrameWork, all on a small form-factor, ideal for wireless communications applications that require a portable, adaptable solution.

CommAgility Ltd.
Booth: 512

CommAgility’s newest offering, the AMC-3C87F3 is a single width, full-sized Advanced Mezzanine Card with exceptional processing performance and bandwidth. It is a second generation WiMax/LTE baseband focused AMC module with full FPGA and DSP processing for 3 sector WiMax solutions. The AMC-3C87F3 offers three CPRI interfaces for full 3 sector Remote Radio Head connectivity and a GPS receiver for timing synchronisation, significantly reducing overall system cost.

Continuous Computing
Booth: 219

Bridging the divide between ATCA and data center performance and storage capabilities, Continuous Computing’s FlexCompute ATCA-XE60 SBC supports both ATCA and Server SKU CPU options. Featuring dual Intel “Nehalem” CPU’s with 8 cores / 16 threads and over 1 terabyte of storage, the XE60 is ideal for DPI, LTE, and IPTV / edge storage applications. Get the best of both worlds: ATCA + dual Intel E5540 “Server SKU Nehalem” CPU’s.

 

Diversified Technology, Inc. (DTI)
Booth: 413

DTI Offers Twelve-Core AMD “Istanbul” AdvancedTCA Processing Blade Diversified Technology, Inc. (DTI) announces higher performance for their ATC6239 AMD-based Node Board by supporting Dual, Six-Core Fourth Generation AMD Opteron™ processors (Istanbul). The blade is a PICMG® 3.1 Option 9 compliant processor blade that provides greater performance per watt than previously offered for intensive multi-threaded networking applications.

Elma Electronic Inc.
Booth: 406

Elma Bustronic Upgrades its ATCA Backplane Line with New Shelf Management Connections. Saving space is critical in any system and Bustronic's new ATCA backplanes utilize space saving connectors for shelf management. The backplanes are designed to allow more shelf managers and AC power options in less space.

Embedded Planet
Booth: 409

Embedded Planet's EP8572A is a single width, full height dual-core processor AMC featuring Freescale's MPC8572E Power Architecture processor at up to 1.5GHz. With a hardware encryption engine, pattern matching engine and integrated Gigabit Ethernet interfaces it's the ideal processor AMC for accelerating demanding networking applications.

ebm-papst Inc.
Booth 508

New high-performance S-Force technology now available in radial blower designs.  The new blowers feature nominal speeds up to 4600 RPM and provide airflows up to 988 CFM, far surpassing current market standards.  The S-Force Radial Blowers are perfect for heat exchangers, telecommunication cabinets, wireless electronic cabinets and more!”

Ge Fanuc Intelligent Platforms
Booth: 303

The new A10200 AdvancedTCA single board computer from GE Fanuc bringsa significant advance in processing capability to leading edge telecommunications applications. Featuring dual Intel Xeon Nehalem 5500 Series dual- or quad core processors and up to 64 Gigabytes of DDR3 SDRAM memory for reduced routing table swapping, and designed such that it can easily be upgraded to the next generation of Intel Xeon processors, it delivers a combination of unprecedented performance and low power dissipation.

Interphase
Booth: 401

iSPAN® 36MC2 Octeon™ Plus AdvancedMC™ 10 GE Packet Processor Card
The Interphase iSPAN® extends the broad portfolio of communication processing and network processing solutions to address the growing need for 10 GE wire-speed packet processing solutions for the delivery of broadband services in the 3G Wireless, Voice Over IP and IMS network infrastructure. The iSPAN® 36MC2 is ideal for applications such as Media Servers, Deep Packet Content Inspection, Node-B/RNCs, Line rate crypto and security functions, VoIP Stateful Protocol Identification, Edge/Access Routers, and Policy Enforcement.

Interphase Intelligent Communication Controller Provides Highest Density Available to Signaling Applications. Whether you are designing signaling gateways, wireless network control elements, SS7 monitoring services, or media servers/gateways, the new high-density iSPAN® 3640 AdvancedMC™ High-Performance T1/E1/J1 Controller can optimize it. For use in ATCA and MicroTCA platforms, the iSPAN 3640 supports SS7 MTP2, ATM AAL5, SSCOP and SSCF protocols. Its 8 T1/E1/J1 interfaces provide up to 248 SS7 Low Speed Links, 8 High Speed Links, or 248 media channels, dramatically optimizing system slot usage. Its high-performance PCIe interface and Gigabit Ethernet (GE) connectivity enable rapid exchange of payload information to a host processor. The iSPAN 3640 comes with a reliable, field-proven iWARE® Software Development Suite. Visit www.iphase.com to learn more.

iSPAN® 36MC2	iSPAN® 3640 High-Performance T1/E1/J1 Controller

 

Kontron America
Booth: 311

Kontron AT8050 AdvancedTCA Processor Blade
The Kontron AT8050 uses a single Intel Xeon L5518 quad-core processor with a 60W power envelope, as opposed to a dual socket approach. With this advantage clients can still make use of the one available AdvancedMC slot for further feature extensions; they can maximize the amount of available memory up to 48GB DDR3; and, most importantly, clients can swap out their existing node blades with the AT8050 without having to upgrade their chassis platforms, which they would have to do to be able to cool several dual-socket-designed quad-core node blades.

N.A.T.
Booth: 514

N.A.T. presents 3rd generation of its MicroTCA Carrier Hub NAT-MCH
N.A.T., the specialist in high performance connectivity products for data and communication solutions has released the 3rd generation of its MicroTCA Carrier Hub, the NAT-MCH, together with version V2.6. of the MCH firmware, providing new and enhanced features. Besides its already available support for 1GbE, clocks (telecom and fabric) and fat pipes as PCI Express, SRIO and XAUI (10GbE) the NAT-MCH now offers enhanced features as port trunking for 1GbE or fat pipe uplinks (CX4 and SFP+) for SRIO and XAUI or a real USB port or GPS frequencies at the clock mezzanine. Also available with the 3rd generation of the NAT-MCH is a low cost version which meets price sensitive uTCA applications in a fully standard compliant way.

Ops A La Carte
Booth: 210

Ops A La Carte has completed and released their HALT Calculator for public use. It can be used to calculate MTBF from HALT and Field Data. Ops A La Carte provides engineering solutions, consulting, training, and testing for both commercial and government markets. Their reliability test lab in Northern California specializes in Accelerated Life Testing.

Pentair Electronic Packaging - Schroff
Booth: 319

Schroff’s innovative 2U 2-slot AdvancedTCA System with Powerful Cooling has a rear pluggable AC power supply and available Shelf Management and Shelf Alarm Panel Options. The 1U MicroTCA chassis with 6x Midsize AMC slots and 1x MCH slot has an embedded AC Power Supply and excellent cooling capabilities. Schroff’s Low 4U MicroTCA Chassis for 12x Midsize AMC slots offers front to rear cooling via two cooling units, and allows up to 12HP Power Modules slots (for AC PM).

Pigeon Point Systems, an Actel Company
Booth: 306

Pigeon Point Systems, an Actel company, will demonstrate its recently released solution based on Actel’s Fusion mixed-signal FPGAs for the mandatory management controller on ATCA boards. This solution demonstrates the benefits of using a mixed-signal FPGA as the core of a management controller. The Pigeon Point reference design includes specialized FPGA logic that off-loads the main Cortex™-M1 ARM CPU (itself an Actel IP block loaded in the FPGA fabric) from threshold computations associated with analog sensors, as well as an optional Ethernet MAC (Media Access Controller) that has been augmented by Actel to support advanced standards for connecting the management controller to an on-board Ethernet controller.

SANBlaze
Booth: 402

SANBlaze Technology, Inc. begins production of its SB-RTM431, a new Rear Transition Module (RTM) featuring a SAS expander and two removable SAS, SATA or SSD disk drives. The SB-RTM431 RTM features an innovative disk FRU mechanism that fits wholly within the RTM thermal footprint. With nothing extending outside the ATCA chassis, the RTM boasts serviceable disk drives in a deterministic cooling environment.

Southco, Inc.
Booth: 408

The new Southco® Flush-Style AdvancedMC™ Module Handle adds styling and ergonomic performance to the hot-swap protection mandated by the PICMG AMC.0 R2.0 standards and the MicroTCA™ standard (MTCA.0) for modular systems. The insertion/extraction mechanism locks modules into place, minimizes protrusion on the module faceplate, and provides a convenient module removal solution for telecom service providers, telecom equipment manufacturers, and other contract OEMs

Sun Microsystems, Inc.
Booth: 400

The Sun Netra CT900 ATCA server delivers the industry-leading flexibility, performance, and availability in an integrated, ultra-dense system design. Built on the ATCA standard, the Netra CT900 allows to mix and match up to 12 UltraSPARC, Intel Xeon or AMD Opteron blades, running the Solaris OS, Windows, or carrier-grade Linux, in the same enclosure. It supports 10GbE switching, and provides the Advanced Rear Transition Modules support.

For more information, check sun.com/atca

VadaTech
Booth: 310

VadaTech introduces the VT850, a 1U μTCA chassis with twelve mid-height AMC slots that can accept any AMC.1, AMC.2,and AMC.3. It delivers high availability through redundant power supplies and redundant cooling units. The VT850 runs VadaTech proven second generation Management software based on it’s VT002 product.

The VT860 is a 5U μTCA chassis that provides four AMC full-size, six mid-size and two compact slots that can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4. It provides CLK1, CLK2, and CLK3 to each slot in addition to the JTAG signals. The VT860 has full redundancy. It’s capable of having redundant MCH, Power Modules, as well as redundant Cooling Units for high availability.

The VadaTech UTC001 is the most feature-rich MCH (MicroTCA Carrier Hub) for the μTCA chassis in the market. It’s management software is based on VadaTech’s robust Carrier Manager and Shelf Manager which have been deployed for many years with proven results.

The VadaTech UTC010 is a 792W power module (available in 396W) for use in a μTCA chassis. The power module runs at 90% efficiency when running at maximum load. This results in over 700W available to the system. It is fully compliant with the MicroTCA.0 revision 1.0 specification; including dual-redundant I2C buses (IPMB-0).

VadaTech introduces ScorpionWare® - a Platform Management Software Application Free of Charge
ScorpionWare® provides an easy to use Graphical User Interface with several features for monitoring, trouble shooting and easy integration of these platforms.  ScorpionWare® is a cross-platform application. The application interfaces with any ATCA and µTCA Platform Management Interface Compliant Management Software using RMCP+ to establish a secure connection.